Serving Up, Well, Serves

For my last technical post for a while, I thought I would talk about the one super-important aspect of volleyball that we have yet to discuss. I'll give you some hints to see if you can figure out what it is: it's how you start every game, all positions have to do it, and it can be the difference between winning and losing a game.

If you guessed serving, you're right.

Although many people think that serving is just a simple, necessary way of starting each rally, serving in reality is much, much more than that. 

Yes, serving is how you start every rally. But that doesn't mean the serve can't be the way you end many rallies as well. The ultimate goal of a serve is to get an ace. The word "ace" can be interpreted in different ways in volleyball, but the general gist is as follows: an ace happens when the serve either hits the ground on the other side of the net or one of the players on the opposing team shanks the ball, making it unplayable. 

A basic serve is not a hard skill to learn. All you need is a little power, a little technique, and the tiniest sprinkle of aim. However, mastering a serve, or serving in general, is a much bigger task. 

To start, there are many different types of serves. The two most basic types of serves are float serves and topspin serves. Float serves are serves with little to no spin on the ball, and they have a tendency to "float" or move while they are in the air. Topspin serves, on the other hand, have a heavy downwards spin on them, and then often drop sooner and sharper than they appear to.

Another common way to separate serving styles and techniques is into short serves and deep serves. Deep serves are typically supposed to land in the last five or ten feet of the court. With deep serves, the hope is that either the players on the opposing team will think it's out of bound, or they will be caught on their toes and not be able to move back in time to give a good pass. 

A short serve, on the other hand, is meant to be served within the first five or ten feet of the court. With short serves, the hope is that either the players will think the ball is too short to be over the net and not even try to get it, or that the players will be caught on their heels and not be able to get to the short ball in time. 

There is also the all-impressive jump serving, which incorporates all of the above techniques and styles, but with a jump. To learn more about serving in general, click here. Until next week, practice some topspins or some short serves (whatever FLOATS your boat) and happy holidays!

Don't PLAY Me

There are lots of different versions of volleyball. You could compare them to the different versions of the iPhone, I suppose. First, there was Volleyball 1.0, also know as middle school volleyball. This is mostly just the volleyball flying aimlessly back and forth over the net, only landing in the court about 40% of the time. The most basic skills are there, but just like with the first iPhone, there is a lot of refining and improvements that can be done.

Then there's Volleyball 2.0. This would be like your average JV2 team in high school. They can bump (sort of) they can set (if the refs are generous) and they can spike (once in a while). No, it's not pretty, but it's getting better.

Following this progression, the next version would be Volleyball 3.0, or JV high school volleyball. They've got the bump, the set, and the spike pretty much down, but they haven't gone much farther. Maybe they run some ones here and there, but for the most part, it's just a really refined version of the basics. They aren't doing anything too fancy, just trying to keep the ball in play and wait for an especially good hit from their one superstar hitter or for the new libero on the other team to shank a serve.

Finally, there's Volleyball 4.0. Although not the most advanced version, Volleyball 4.0 is what I am going to talk about today because it is when one of my favorite features becomes available: Plays.

Plays in volleyball are an interesting, complicated, and extremely important part of any successful team's offense. Plays, in the best way I can describe them, are different ways that the offense can attack the ball in order to get a kill and delay or confuse the players on the other side of the net. 

Now, plays are not always standard throughout all teams. In fact, 99% of the time, they are not. Every team in the country has different plays with different names and different ideas of when the play should be run. For example, my team in high school had plays such as Piggy, Black, Gold, Double D, and Snake. These were plays with names that we made up ourselves, and no other team in the country has those same plays.

However, there are a few more basic plays that are standards pretty much everywhere. Some of those plays are explained below:

One: a middle hit when the setter sets a very low set and the middle hitter must approach really fast 

Hut: a low or "quick" set to the outside hitter; similar to a one but for a different position

X: two players switch positions to hit; for example, the middle goes behind the setter to hit from the right side and the right side moves to hit in the middle

32: a set that is placed between the middle and outside positions; either the middle hitter or the outside hitter can attack

To learn about other offensive plays that are pretty universally accepted, click here. That's all I got for today, PLV (peace, love, and volleyball)!

HIT Me Baby (One More Time)!

The server goes to the backline. She slowly bounces the ball a few times, waiting for the referee to signal for her. Once the whistle is blown, she gives it a nice, low toss, and floats the ball into the left back corner on the opposing side. The libero, who is stationed there for that rotation of serve-receive, gives a beautiful pass to the front right position, where the setter had released to just seconds earlier. Her fingers rap around the edges of the ball as it reaches her forehand. She then pushes a gorgeous set to the outside. Now, it's all up to-

the hitter.

Ah yes, the hitter. Or as many of you may know her as, the spiker (which is not what the position is really called, but you are forgiven for your ignorance, for now). The hitter is undoubtedly the position on the court that receives the most glory and credit, and in some ways, this recognition is well-deserved. 

The hitter is the main, and I guess you could say only, offensive position on the team. Their job is to try to hit the ball so that the other team cannot get a good pass, so that their team wins the point. However, hitters do not just play offense. They are also an important part of the defense as well. When the hitters on the other team go up to hit, the hitters on the opposing team jump up at the net and use their hands as an extra barrier to try to stop the ball from ever reaching their side of the net. This is called a block. 

Although it may seem as though being a hitter is a fairly easy position to play, it's not. Many people think the only thing you need to be a hitter is the genetic quality of being tall, but this is not the case. Yes, if you are on the taller side, it is easier for coaches to train you to be a good hitter. However, I have played against many hitters in my day that if you saw in passing, you would probably qualify as rather short, around 5'5" or 5'6". 

There is a lot more that goes into being a hitter than simply your height. Another misconception about hitting is that to be successful in that position, you need to have above-average strength. Again, this is not the case. Often, a smart hit is going to be much more effective than a hard-as-you-can hit. Hitters need to be able to assess what is happening on the other side of the court and decide where the most effective spot to place the ball would be. 

Unlike liberos and setters, where there is one or at most two of them on the court at a time, there are always at least three hitters on the court at a time. There is the outside, who hits from the left front position, the middle, who hits from the middle front position, and the right side, who hits from the right front position. With three different offensive players in the front row, there are many different plays and sets that can be run to try to get a kill, but I'll go over those in my next blog.

Until then, it you want to learn more about hitters and how they contribute to the game of volleyball, you can read about it here. And with that, we've now completed the sequence of bump, set, and spike! Woohoo! It's been a KILL-er run if you ask me. ;) Come back next week so we can really DIVE into the game of volleyball!

Game, SET, Match

Alright, since I spent my last post hyping up liberos/defensive specialists, I believe it's only fair that I do my next post on the next player to handle the ball after the passer: the setter.

To the unaided eye, it may seem that the setter isn't that important, or that her job isn't that hard. However, if you start to think more critically, the setter, in many ways, has the hardest and most important job on the court. 

The setter is like the point guard in basketball, she is the one who decides which plays the hitters are going to run. Plays in volleyball relate to the different kinds of sets the hitters can give the hitter. For example, my high school varsity team had a play called Double D, which meant the outside hitter would go for a hunt set, the middle hitter would hit a one, and the right side hitter would go for a back one. 

If that made no sense to you at all, don't worry, I'll explain in it a further post. Basically, the setter decides which hitter is going to get the ball, and what type of set they are going to get. In the most basic terms, the setter really controls the offense of a team. 

Besides having to make crucial decisions for how a team will run their offense, setters have a very physically demanding job as well. The setter is the only player on the team who touches the ball just about every time the ball comes over the net. And although the passers are supposed to pass the ball right to the setter in the right from position, I speak from experience when I say that this doesn't always happen. Setters often having to go running (and diving) all the way across the court to save a ball. 

I, personally, have always secretly wished that I was a setter. I fooled myself into thinking I could set for one season of club volleyball, but when I returned to my high school team the following year I was awakened from my dream. Although setting looks as though the physical act is easy, I can assure you it's not. Setting is arguably the hardest skill in volleyball to perfect, and it is one of those abilities that most of the best setters you watch are simply born with. (Lucky ducks)

Now I'll get on to the last position in my next post (it's a crowd favorite I guarantee it), but if you want to learn some more about what it takes to be a setter, there is a great article here about some different skills and abilities that setters need to have if they want to be the best at their position. Until next time!

"The Girl with the Wrong Jersey"

Now that we've become acquainted with each other, I decided it was time to blog about something (or some position) very near and dear to my heart: the libero.

Now many people simply know the libero as "the player wearing the wrong color jersey." This an unfortunate failure of our sports fans that is extremely upsetting to me. Because, in reality, the libero is so much more than simply a player wearing the "wrong" jersey. 

Now, I might be a little bias when it comes to talking about the libero, simply because this was the position I myself played in middle and high school. But in general, I and many other players as well believe that the liberos are not properly understood and under appreciated. (Just so you know, I will be doing posts about the other positions too, I just decided to start with this one since it is my position.) So, let's get down to business. 

Obviously, the libero is a passer. I think most people understand that. She is usually the best passer on the team, and he/she will play the back row for hitters in the front row that are perhaps not-so-stellar passers. The libero can go in for as many different players as she pleases, and she does not need to sub in and out of the court. That being said, she cannot, under any circumstance, play the front row. She can also only serve for one player on the team, per set. (If you would like to read more about the specific rules that apply to the libero, click here for the official rules.)

All of the positions on the court are difficult. I'm not going to try and convince you that the other positions have it easy, because they don't. However, think about it this way: the libero, or simply the passers in general, are the only ones that have to play the ball off of an attack from the other team. The passers job is to pass balls that the hitters are trying to hit away from them at all costs. 

Setters, on the other hand, are getting a ball that is a passed to them from their own teammates, who are trying to give them as perfect of a pass as possible. Similarly, hitters are receiving the ball from the setters, who are trying to set them up for a kill. Basically, what I'm trying to say is that the passers are the only position were the ball is not coming from a teammate. 

However, being the libero, or a passer in general, does have its perks. One of my favorite things about being the libero is when you get a great save. One of those moments when the hitter spikes it super hard, in an area that you're not, and everyone (including you) thinks it's down . . . and then you get it up. It's honestly the best feeling in the world.

Speaking of the best in the world, to end this post here is a little video of the Japanese National Volleyball Team's libero. She was voted libero of the tournament in the last Olympics, and for a good reason. If you're not a libero, or even a volleyball player yourself, watching this video should make you feel about 10% of what it feels like to actually be there, getting those incredible ups for yourself. :)